Fujitsu T5010 - LifeBook Tablet PC Operating Manual Download

Page: 63 / 144

Using your notebook

A26391-K276-Z226-1-7619, edition 2

Removing a module

►

Turn the notebook over and place it on a stable, flat and clean surface. If necessary, lay an
anti-slip cloth on this surface to prevent the notebook from being scratched.

Use the corresponding icon in the task bar to stop the module:

►

Left-click on the icon.

►

Select the module you want to stop and remove.

►

Press the Enter key.

Wait for the dialogue box which tells you that it is now safe to remove the module.

►

Carefully slide the eject lever in the direction of the arrow, up to the stop (1).

The module will move out slightly.

►

Pull the module out of the module bay (2).

Summary of Contents for T5010 - LifeBook Tablet PC

















































































































































Search results

Summary of Contents for T5010 - LifeBook Tablet PC

Reviews:

Related manuals for T5010 - LifeBook Tablet PC

Brands by name

Popular brands

Fujitsu T5010 - LifeBook Tablet PC, Operating Manual

Search results

Summary of Contents for T5010 - LifeBook Tablet PC

Reviews:

Related manuals for T5010 - LifeBook Tablet PC

Brands by name

Popular brands