Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual Download Page 65

Page: 65 / 265

More information on suitable backup software solutions and related

documentation is available from the Fujitsu web pages.

5.2.3

Enabling replaced components in the BIOS

When a CPU, an expansion card, or a memory module fails, the defective

component will be set to

Disabled

Failed

in the BIOS. The server will then

reboot with only the intact hardware components remaining in the system

configuration. After replacing the defective component, it needs to be

reenabled in the BIOS.

▶

Enter the BIOS.

▶

Select the

Advanced

menu.

▶

Select the status menu of the desired component:

▶

Select

CPU Status

for CPUs.

This option is only available for multi-processor systems.

▶

Select

Memory Status

for memory modules.

▶

Select

PCI Status

for expansion cards.

▶

Reset replaced components to

Enable

▶

Save your changes and exit the BIOS.

For more information on how to access the BIOS and modify settings,

see the corresponding BIOS Setup Utility reference manual.

5.2.4

Verifying the system time settings

This task only applies to Linux and VMware environments.

After the system board has been replaced, the system time is set automatically.

By default, the RTC (Real Time Clock) time standard is set as the local time.

Basic software procedures

TX1310 M5

Upgrade and Maintenance Manual

Summary of Contents for PRIMERGY TX1310 M5










































































































































































































































































Search results

Summary of Contents for PRIMERGY TX1310 M5

Reviews:

Fujitsu PRIMERGY TX1310 M5, Upgrade And Maintenance Manual, Page: 65 / 265

Search results

Summary of Contents for PRIMERGY TX1310 M5

Reviews: