Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual Download Page 56

Page: 56 / 265

4.7.5

Installing the side cover

Figure 24: Installing the side cover

▶

Hook the side cover in the bottom side cant of the chassis (1).

▶

Push the side cover against the chassis until the locking mechanism

engages (2).

4.8

Connecting the power cord

CAUTION

The server automatically adjusts to a mains voltage in the range from

100 V - 240 V.

▶

You may only operate the server if its rated voltage range

corresponds to the local mains voltage.

In a second socket below the main socket, the PSU can provide the

power supply for an optional monitor.

Basic hardware procedures

Upgrade and Maintenance Manual

TX1310 M5

Summary of Contents for PRIMERGY TX1310 M5










































































































































































































































































Search results

Summary of Contents for PRIMERGY TX1310 M5

Reviews:

Fujitsu PRIMERGY TX1310 M5, Upgrade And Maintenance Manual, Page: 56 / 265

Search results

Summary of Contents for PRIMERGY TX1310 M5

Reviews: