Fujitsu PRIMERGY TX1310 M5, Upgrade And Maintenance Manual, Page: 183 / 265

Replacing the defective CMOS battery
1
2
3
4
Figure 120: Replacing the CMOS battery
▶ Press the locking spring into direction of the arrow (1), so that the CMOS
battery jumps out of its socket.
▶ Remove the CMOS battery (2).
CAUTION
Sharp tools such as screw drivers might damage system board
components in case of slipping.
▶ If the CMOS battery cannot be ejected without the help of a tool,
it is recommended to use a tooth pick.
▶ Insert a new CMOS battery of the same type into the socket (3) and (4).
Concluding steps
▶ Dispose of the CMOS battery in accordance with local regulations
concerning special waste.
▶ "Reassembling" on page 50 .
▶ "Connecting the power cord" on page 56 .
▶ "Switching on the server" on page 57
▶ "Installing the bay cover" on page 58
▶ "Locking the server" on page 59
System board and components
TX1310 M5 Upgrade and Maintenance Manual 183