Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual Download Page 5

Page: 5 / 265

Only for Japan: About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.
For more information on the usage and operation conditions of each available

type of HDD, see the following internet address:

https://jp.fujitsu.com/platform/server/primergy/harddisk/

Only for Japan:

Shielded LAN cables should be used in this product.

UK Importer information

Fujitsu Services Limited
22 Baker Street, London, W1U 3BW, United Kingdom

TX1310 M5

Upgrade and Maintenance Manual

Summary of Contents for PRIMERGY TX1310 M5










































































































































































































































































Search results

Summary of Contents for PRIMERGY TX1310 M5

Reviews:

Fujitsu PRIMERGY TX1310 M5, Upgrade And Maintenance Manual, Page: 5 / 265

Search results

Summary of Contents for PRIMERGY TX1310 M5

Reviews: