Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual Download Page 188

Page: 188 / 265

Enabling the TPM in the system board BIOS

Proceed as follows:

▶

Switch on or restart your server.

▶

As soon as the startup screen appears, press the [F2] function key to enter

the BIOS setup menu.

▶

Select the

Advanced

menu.

▶

Select the

Trusted Computing

submenu.

▶

Set the

TPM Support

setting to

Enabled

▶

Under

Pending TPM operation

, select the desired TPM operation mode.

▶

Save your changes and exit the BIOS.

For information on how to access the BIOS and modify settings, see the

corresponding BIOS Setup Utility reference manual.

15.4.3 Removing the TPM

Field Replaceable Unit

(FRU)

Hardware: 30 minutes

Tools:

Removing the system board:
– Phillips PH2 / (+) No. 2 screw driver

Removing the TPM:
– Bit screw driver
– Flat nose pliers
– TPM bit insert

(*)

For Japan:

– TPM module fixing tool (S26361-F3552-L909)

System board and components

188

Upgrade and Maintenance Manual

TX1310 M5

Summary of Contents for PRIMERGY TX1310 M5










































































































































































































































































Search results

Summary of Contents for PRIMERGY TX1310 M5

Reviews:

Fujitsu PRIMERGY TX1310 M5, Upgrade And Maintenance Manual, Page: 188 / 265

Search results

Summary of Contents for PRIMERGY TX1310 M5

Reviews: