Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual Download Page 41

Page: 41 / 265

Figure 4: Folding out the bay cover

▶

Press up on the locking latch and fold out the bay cover.

▶

Remove the bay cover.

4.4

Shutting down the server

CAUTION

▶

For more information, see

"Important information" on page 25

▶

Inform the system administrator that the server will be shut down and put

offline.

▶

Terminate all applications.

▶

Perform the required procedures described in the preliminary steps of each

upgrade or maintenance task.

▶

Unlock the server, see

"Unlocking the server" on page 39

▶

Remove the bay cover, see

"Removing the bay cover" on page 40

Basic hardware procedures

TX1310 M5

Upgrade and Maintenance Manual

Summary of Contents for PRIMERGY TX1310 M5










































































































































































































































































Search results

Summary of Contents for PRIMERGY TX1310 M5

Reviews:

Fujitsu PRIMERGY TX1310 M5, Upgrade And Maintenance Manual, Page: 41 / 265

Search results

Summary of Contents for PRIMERGY TX1310 M5

Reviews: