Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual Download Page 62

Page: 62 / 265

▶

Ask the system administrator to suspend BitLocker-protection on the system

volume, using the

BitLocker Drive Encryption

control panel item.

This will temporarily disable BitLocker for maintenance purposes. The

volume will not be decrypted and no keys will be discarded.

For Windows Server 2008

▶

Click

Start

Control Panel

Security

BitLocker Drive Encryption

open the BitLocker Drive Encryption.

▶

Select the system volume, and click

Turn Off BitLocker

▶

From the

Turn Off BitLocker

dialog box, click

Disable BitLocker

For Windows Server 2008 R2 and above

▶

Click

Start

Control Panel

System and Security

BitLocker Drive

Encryption

to open the BitLocker Drive Encryption.

▶

Select the system volume, and click

Suspend Protection

▶

Click

Yes

to confirm that your data will not be protected while BitLocker is

suspended.

In order to determine which features are accessible through the

BitLocker setup wizard, it may be necessary to modify the BitLocker

Group Policy settings. For more information on how to suspend

BitLocker drive encryption, see the Microsoft TechNet library at:

https://technet.microsoft.com/library/cc731549.aspx

For more information, see the Fujitsu web pages.

Basic software procedures

Upgrade and Maintenance Manual

TX1310 M5

Summary of Contents for PRIMERGY TX1310 M5










































































































































































































































































Search results

Summary of Contents for PRIMERGY TX1310 M5

Reviews:

Fujitsu PRIMERGY TX1310 M5, Upgrade And Maintenance Manual, Page: 62 / 265

Search results

Summary of Contents for PRIMERGY TX1310 M5

Reviews: