manualshive.com logo in svg

Fujitsu PRIMERGY TX1310 M5, Upgrade And Maintenance Manual, Page: 15 / 265

Share
Download
Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual Download Page 15

1

Introduction

1.1

Concept and target groups of this manual

This upgrade and maintenance manual provides instructions for the following

procedures:

–

Upgrading the server configuration by adding optional hardware

components.

–

Upgrading the server configuration by replacing existing hardware

components with superior ones.

–

Replacing defective hardware components.

This manual focuses on on-site maintenance tasks. It is recommended to

prepare each service assignment following remote diagnostics procedures, as

described in the "ServerView Suite Local Service Concept (LSC)" manual, see

"Documentation overview" on page 22

.

CAUTION

The document at hand comprises procedures of a wide range of

complexity.

▶

Check the profile of qualification for technicians before assigning

tasks.

▶

Before you start, carefully read 

"Classification of procedures" on 

page 18

.

1.2

Notational conventions

The following notational conventions are used in this manual:

Text in bold

Indicates references to names of interface

elements.

Text in monospace

Indicates commands and text to be entered by

the user.

TX1310 M5

Upgrade and Maintenance Manual

15

Summary of Contents for PRIMERGY TX1310 M5










































































































































































































































































Reviews:

No comments