Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual Download Page 87

Page: 87 / 680

Basic software procedures

5.1

Validation

Depending on your server and the installed features some information is

not valid for your server.

5.2

Starting the maintenance task

5.2.1

Suspending BitLocker functionality

BitLocker Drive Encryption provides protection for OS and data drives by

encrypting the contents and requiring users to authenticate their credentials to

access the information. In the scenario described here, BitLocker uses the

compatible Trusted Platform Module (TPM) to detect if the computer's startup

process has been modified from its original state.

For more information on how to use BitLocker on a computer without a

compatible TPM, see the "BitLocker Drive Encryption" documentation

page at:

https://technet.microsoft.com/library/cc731549.aspx

Suspending BitLocker Drive Encryption is a temporary method for removing

BitLocker protection without decrypting the drive Windows is installed on.

Suspend BitLocker before modifying the server’s hardware configuration or

startup files. Resume BitLocker again after the maintenance procedure is

complete.

RX2540 M6

Upgrade and Maintenance Manual

Summary of Contents for PRIMERGY RX2540 M6









































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIMERGY RX2540 M6

Reviews:

Related manuals for PRIMERGY RX2540 M6

Brands by name

Popular brands

Fujitsu PRIMERGY RX2540 M6, Upgrade And Maintenance Manual

Search results

Summary of Contents for PRIMERGY RX2540 M6

Reviews:

Related manuals for PRIMERGY RX2540 M6

Brands by name

Popular brands