Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual Download Page 301

Page: 301 / 680

▶

Remove the lower slot cover.

CAUTION

▶

Keep the slot cover for future use.

▶

If the expansion card is removed and not replaced with a new one,

the slot cover must be reinstalled due to cooling, to comply with

applicable EMC regulations and to protect against fire.

Figure 189: Installing the GPU card in a riser module

▶

Carefully insert the GPU card into the PCIe slot and press down firmly until it

is fully seated in the slot.

Expansion cards and backup units

RX2540 M6

Upgrade and Maintenance Manual

301

Summary of Contents for PRIMERGY RX2540 M6









































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIMERGY RX2540 M6

Reviews:

Related manuals for PRIMERGY RX2540 M6

Brands by name

Popular brands

Fujitsu PRIMERGY RX2540 M6, Upgrade And Maintenance Manual

Search results

Summary of Contents for PRIMERGY RX2540 M6

Reviews:

Related manuals for PRIMERGY RX2540 M6

Brands by name

Popular brands