Fujitsu PRIMERGY RX2530 M1, Upgrade And Maintenance Manual, Page: 95 / 372

RX2530 M1
Upgrade and Maintenance Manual 95
Basic software procedures
5.2.14 Resuming BitLocker functionality
If BitLocker Drive Encryption has been suspended for maintenance purposes
(see section
"Suspending BitLocker functionality" on page 71 ), it has to be re-
enabled to complete the service task.
I
If BitLocker Drive Encryption has been suspended prior to replacing
components you won't be asked for a recovery key when rebooting the
server after the maintenance task. However, if BitLocker functionality has
not been suspended, Windows will enter recovery mode and ask you to
input recovery key for further booting.
Ê
In this case, ask the system administrator to enter the recovery key in
order to boot the operating system.
Ê
Ask the system administrator to enable the previously suspended BitLocker-
protection on the system volume, using the
BitLocker Drive Encryption
control
panel item:
For Windows Server 2008:
Ê
Open BitLocker Drive Encryption by clicking the Start button, clicking
Control Panel , clicking Security , and then clicking BitLocker Drive
Encryption .
Ê
Select the system volume, and click Turn On BitLocker .
For Windows Server 2008 R2 and above:
Ê
Open BitLocker Drive Encryption by clicking the Start button, clicking
Control Panel , clicking System and Security , and then clicking BitLocker
Drive Encryption .
Ê
Select the system volume, and click
Resume Protection
.
I
For further information on how to resume BitLocker drive
encryption, please refer to the Microsoft TechNet library at
http://technet.microsoft.com/library/cc731549.aspx.
Fujitsu service partners will find additional information (also available
in Japanese) on the Fujitsu Extranet web pages.