Fujitsu PRIMERGY RX2530 M1, Upgrade And Maintenance Manual, Page: 298 / 372

298 Upgrade and Maintenance Manual
RX2530 M1
System board and components
●
SATA DOM
With the Innodisk Serial ATA Disk on Module (SATADOM) an internal SSD
is offered. This SSD can be configured as a boot device or data storage
device.
●
iRMC microSD card
The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC.
15.2 CMOS battery
15.2.1 Replacing the CMOS battery
Safety notes
V
CAUTION!
●
The CMOS battery must be replaced with an identical battery or with
a battery type recommended by the manufacturer.
●
Keep lithium batteries away from children.
●
Do not throw batteries into the trash can. Lithium batteries must be
disposed of in accordance with local regulations concerning special
waste.
●
For further safety information, please refer to section "Environmental
protection" in the operating manual of your server.
●
Ensure to insert the CMOS battery with the positive pole facing
up!
Upgrade and Repair Unit
(URU) Hardware: 5 minutes
Tools: tool-less; recommended: tooth pick