Fujitsu PRIMERGY RX2530 M1, Upgrade And Maintenance Manual, Page: 312 / 372

312 Upgrade and Maintenance Manual
RX2530 M1
System board and components
Figure 231: Installing the TPM
Ê
Connect the TPM to the system board (1).
Ê
Fasten the TPM with the special screw for the TPM using the TPM bit insert
or TPM module fixing tool (Japanese market) (2).
V
CAUTION!
Do not fasten the screw too firmly. Stop it by extent where the head
of the screw lightly touches the TPM (torque value of 0.6 Nm).
15.4.1.3 Concluding steps
Ê
Install the riser module 2 as described in section "Installing a riser module"
on page 63 .
Ê
"Reassembling" on page 54
Ê
"Connecting the server to the mains" on page 60
Ê
"Switching on the server" on page 61
Ê
"Resuming BitLocker functionality" on page 95
Ê
Enable TPM in the system board BIOS. Proceed as follows:
Ê
Switch on or restart your server.
Ê
As soon as the startup screen appears, press the
[F2]
function key to
enter the BIOS.
Ê
Select the Advanced menu.
Ê
Select the Trusted Computing submenu.
Ê
Set the TPM Support and TPM State settings to Enabled .