Fujitsu PRIMERGY RX2530 M1, Upgrade And Maintenance Manual, Page: 249 / 372

RX2530 M1
Upgrade and Maintenance Manual 249
Processors
Ê
Remove the protective cover from the heat sink.
V
CAUTION!
Ensure not to touch the heat-conductive paste on the bottom of the
heat sink.
Figure 171: Installing the heat sink
Ê
Align the heat sink and fit it on the processor socket.
Ê
Position the screws in the holes carefully, making sure they are upright.
V
CAUTION!
– Ensure that the screws on the heat sink are properly seated on the
threaded holes.
– Ensure that the heat sink cooling fins match the direction of the
airflow!
Ê
Fasten it in a crossover pattern with four screws according to the numbering
(torque 1.0 Nm, the description of this torque value doesn't apply to the
Japanese market.)
11.2.4 Upgrading the main memory
Ê
Select an adequate memory configuration for "Two CPUs populated" as
described in section
"Basic information" on page 224 .
Ê
Install memory modules as described in section "Installing a memory
module" on page 234 .