manualshive.com logo in svg

Fujitsu Lifebook E360, Manual

Share
Download
Fujitsu Lifebook E360 Manual Download Page 90

S e c t i o n   F o u r

80

4. Align the connector of the external floppy

disk drive adapter with the connector
towards the body of your notebook with the
wide side of the connector up.

(Figure 4-11.)

5. Insert the connector of the external floppy

disk drive adapter firmly into the port on
your notebook until it clicks.

P O I N T

To install an external floppy disk drive,
simply follow steps 1, 3, 4 and 5.

Figure 4-11 External Installation of a Floppy Disk Drive.

External Floppy Disk
Drive Port

External Floppy Disk

Drive Connector Cover

Connector
Release Button

Modular Floppy 
Disk Drive

External adapter for the
Modular Floppy Disk Drive

To disconnect:

1. Close all files and exit all applications 

2. Squeeze together firmly on the release but-

tons on either side of the external floppy 
disk drive connector next to the body of
your notebook.

(Figure 4-11.)

3. Pull the connector free.

4. Close the floppy disk drive port cover on

your notebook and press it shut until 
it latches.

5. Remove the modular floppy disk drive from

the external adapter.

P O I N T

To disconnect an external floppy disk
drive, simply follow steps 1-4.

MEMORY UPGRADE MODULE

Your notebook has 32MB or 64MB of on-
board SDRAM. To increase your memory
capacity you may install a memory upgrade
module in the memory upgrade compartment
in the bottom of your notebook. The memory
upgrade module is a Small Outline dual-in-line
memory module (SDIMM). You may add
modules of different capacity.

Summary of Contents for Lifebook E360




















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands