Fujitsu Lifebook E360, Manual

Page: 32 / 147

S e c t i o n T w o
22
C A U T I O N
Never turn your notebook off while an
application is running. Be sure to close all
files, exit all applications and shut down
your operating system prior to turning off
the power with the power switch. If files
are open when you turn the power off,
you will lose any changes that have not
been saved, and may cause disk errors.
P O I N T
When your notebook has been shut
down from Windows, it is not the same
as being turned off from the power
switch. It is in a pseudo-off state, with all
applications closed, but can and must be
turned on by pressing the Suspend/
Resume button. It is drawing some
current in the pseudo-off state.
Shutting down your notebook from Windows
lets your notebook shut down operations, and
turn off the power in the proper sequence to
prevent errors. The sequence is:
1. Click on the Start button.
2. Click on
Shut Down.
3. Verify that
Shut Down
is selected and click on
Yes
.
If you are going to store your notebook for a
month or more, take the following precautions:
1. Remove any CD and/or floppy disk.
P O I N T
You may also select Shut Down once the
power is off for 10 seconds or more you
can restart your notebook with the Suspend/
Resume button, or once the power is off,
turn the power switch to Off for 10 seconds
and then switch it to On. These alternative
methods are not recommended.
3. Click on
Restart
4. Verify that
Restart
is selected and
click on
Yes.
Windows will shut down and restart
your notebook.
2. After shutting down from Windows turn off
your notebook using the power switch.
3. Close your notebook display panel.
4. Disconnect the AC adapter.
5. Remove the batteries and store them
separately in a cool dry place.
C A U T I O N
Turning off the power switch without
exiting Windows may cause an error
when you start the next time. Turning
the power to On when it has been Off
for less than 10 seconds may also cause
an error when you start the next time.
RESTARTING THE SYSTEM
If your system is on and you need to restart it,
be sure that you use the following procedure.
1. Click on the Start button.
2. Click on
Shut Down.