manualshive.com logo in svg

Fujitsu Lifebook E360, Manual

Share
Download
Fujitsu Lifebook E360 Manual Download Page 16

One

S e t t i n g   U p   Y o u r   L i f e B o o k   E   S e r i e s

L i f e B o o k   E   S e r i e s   f r o m   F u j i t s u

5

■

Fast IrDA (4Mbps) compatible infrared port
for wireless data transfer.
(Windows 98 SE only.)

■

Integrated ErgoTrac™ or Touchpad pointing
device for customized comfort and cursor
control. (Custom configured systems only.)

■

External monitor support with simultaneous
display capabilities.

■

Full-size keyboard with three dedicated
Windows keys.

■

Hot swap PS/2 port for an external keyboard
or external mouse.

■

USB device support. (Windows 98 SE only.)

■

Bridge battery for warm-swapping of batteries.

■

Standard pre-installed software:

■

Microsoft Windows 98 SE or Windows NT
4.0 operating system.

■

LapLink Professional for file transfer via
modem, cable or infrared port.
(Windows 98 SE only.)

■

PMSet 98 (Windows 98 SE) or PowerPanel
(Windows NT 4.0) for system
power management.

C A U T I O N

The internal modems on all Fujitsu E
Series notebooks from Fujitsu PC
Corporation are not qualified for use with
telephone systems outside the United
States and Canada and may not operate
in other countries.

■

Agate Tioman HotSwap for hot-swapping
functionality in Multi-function bays.
(Windows 98 SE only).

■

Phoenix NoteDock for hot docking/
undocking support and hot-swapping
functionality in the Multi-function bays
(with Windows NT 4.0 only).

■

Phoenix Card Executive for PCMCIA card
support. (Windows NT 4.0 only.)

■

PC-Doctor for system diagnostics.

■

McAfee VirusScan for virus protection.

■

ESS AudioRack for 3D-Stereo, audio CD and
other audio controls. (Windows 98 SE only.)

■

Netscape Communicator.

■

Standard user-install software:

■

AOL (Windows 98 SE only).

■

Compuserve (Windows 98 SE only).

■

Earthlink (Windows 98 SE only).

■

Full audio and video features:

■

16-bit SoundBlaster Pro-compatible
sound chip.

■

3D-Stereo for multiple speaker effect.

■

Zoomed Video support for full motion
video acceleration.
(With Windows 98 SE only.)

■

Built-in stereo speakers.

■

Built-in mono microphone.

■

Stereo line in jack.

■

Stereo headphone jack.

■

Microphone jack.

■

Combination PC Card slot accommodates
two Type II or one Type III.

Summary of Contents for Lifebook E360




















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands