S e c t i o n F i v e
108
Problem
Possible Cause
Possible Solution
The display goes blank by itself after you
3. The power management timeouts may be set
3. Press any key or move the pointer,
have been using it. (continued)
for very short intervals and you failed to notice
if this doesn’t work press the
the display come on and go off again.
Suspend/Resume button.
The Built-in Display does not close.
1. A foreign object, such as a paper clip, is stuck
1. Remove all foreign objects from
between the display and the keyboard.
the keyboard.
The Built-in Display has bright or dark spots.
1. If the spots are very tiny and few in number,
1. This is normal; do nothing.
this is normal for a large LCD display.
2. If the spots are numerous or large enough to
2. Display is faulty; contact your
interfere with your operation needs.
support representative.
The application display uses only a portion
1. You are running an application that does not
1. Display compression gives a clearer but
of your screen and is surrounded by a dark frame.
support 800 x 600 pixel resolution display
smaller display for applications that do not
and display compression is enabled.
support 800 x 600 pixel resolution. You can
fill the screen but have less resolution by
changing your display compression setting,
(
See Video Features Submenu of the Advanced
Menu in the BIOS guide. See page 63 for
more information.)
Summary of Contents for Lifebook E360
Page 6: ...T a b l e o f C o n t e n t s ...
Page 9: ...LifeBook E Series from Fujitsu P r e f a c e ...
Page 142: ...I n d e x ...
