Fujitsu Lifebook E360, Manual

Page: 29 / 147

Two
S t a r t i n g Y o u r L i f e B o o k E S e r i e s
L i f e B o o k E S e r i e s f r o m F u j i t s u
19
P O I N T
If you reject the terms of the license
agreement you will be asked to review
the license agreement for information on
returning Windows NT Workstation or to
shut down your notebook.
Registration
Look in the box that your notebook came in
and you will find a Windows NT Workstation
Certificate of Authenticity shrink wrapped with
the Windows NT Workstation Users manual.
On the certificate you will find a bar-code with
a number above it. This is your product ID
and the number you should enter on the
Registration screen. When you have entered
the number exactly as shown click on the
Next
> button.
Computer Name
You need to enter a name for your computer to
be identified by on the network. This must be a
unique name and must be 15 characters or less.
Enter a name for your computer to be identi-
fied by and click on the
Next
> button.
Administrator Account
This screen lets you setup a password for the
Administrator account on your notebook. The
administrator account has authority over all
user accounts. You must not forget this pass-
word. If you do not wish to have password
Booting the System with Windows NT 4.0
We strongly recommend that you not attach
any other external devices and do not put any
DVD, CD or floppy disk in your drives until
you have gone through the initial power on
sequence.
When you turn on your notebook for the first
time it will display a Fujitsu logo on the screen.
If you do nothing the system will read the hard
drive for the operating system software, flash
the notebook configuration information on the
screen, and then the Windows NT 4.0 Setup
Wizard Screen will appear. You will then be
stepped through the condition of use process.
You must complete this initial process before
you will be able to use your notebook. (If you
wish to access the BIOS setup utility before you
go through the condition of use process you
must press the
F2 key while the Fujitsu logo is
still visible. If you press the Esc key while the
Fujitsu logo is still present you will get a dialog
box which will allow you to select which drive
is to be used for finding the operating system.)
If you turn off the power without using the on
screen
Cancel
button you will get an error
message when you start your notebook again.
The following describes what you will be asked
to do at each of the five screens.
Windows NT Setup
The Windows NT Setup screen appears after
you accept the license agreement. This setup
wizard will guide you through the setup of your
Windows NT Workstation.
Name and Organization
Fill in your name and the company name as
you want the software licensed. To step from
the name blank to the company blank press the
Tab key. When the information has been entered
click on the
Next
> button. You will not be
allowed to continue until you make an entry.