Five
T r o u b l e s h o o t i n g
L i f e B o o k E S e r i e s f r o m F u j i t s u
105
Problem
Possible Cause
Possible Solution
The Suspend/Resume button does
2. You did not hold the button in long enough.
2. Hold the button longer. This may need to
not work. (continued)
be a few seconds if your application is
preventing the CPU from checking for
button pushes.
3. There may be a conflict with the
3. Close all applications, and try the
application software.
button again.
The system powers up, and displays
1. The boot sequence settings of the setup utility
1. Set the operating source by pressing the
Esc
power on information, but fails to load
are not compatible with your configuration.
key while the Fujitsu logo is on screen or use
the operating system.
the
F2
key and enter the setup utility and
adjust the source settings from the Boot
menu.
(See page 63 for more information.)
2. You have a secured system requiring a
2. Make sure you have the right password.
password to load your operating system.
Enter the setup utility and verify the
Security settings and modify them as appro-
priate. (
See the Security Menu in the BIOS
guide. See page 63 for more information.)
3. Internal hard drive was not detected.
3. Use the BIOS setup utility Main menu,
Primary Master submenu to try to auto
detect the internal hard drive.
Summary of Contents for Lifebook E360
Page 6: ...T a b l e o f C o n t e n t s ...
Page 9: ...LifeBook E Series from Fujitsu P r e f a c e ...
Page 142: ...I n d e x ...
