Fujitsu Lifebook E360, Manual

Page: 81 / 147

Four
U s e r I n s t a l l a b l e F e a t u r e s
L i f e B o o k E S e r i e s f r o m F u j i t s u
71
4. The 'Agate Tioman' window will pop up and
display the following message:
It is now
safe to remove and insert
devices in either Multi-func-
tion Bay. After you have com-
pleted device swapping, click
the OK button.
5. Slide the release latch at the left rear corner of
the Multi-function Bay toward the outer edge
of your notebook.
Figure 4-3 Removing and Installing a
Device in Multi-function Bay 2
6. Slide the device forward until the unit is clear
of the compartment. This will require some
force. Use the finger ridge on the bottom of
the device.
Installing a Device in Multi-function
Bay 1 or 2 Using Tioman Hot Swap
1. Orient the item to be installed with the finger
ridge away from the body of your notebook
and the connector toward the body of
your notebook.
2. With the module connector toward the back
of your notebook align the grooves on the
side of the device with the tracks in the side
of the bay. (
Figure 4-3. )
3. Slide the module toward the back of your
notebook until it clicks into place.
4. Press the
OK
button to continue.
5. The software will automatically detect the
new devices and activate them within
your system.
DVD or CD-ROM Drive
Your DVD or CD-ROM drive is durable but
you must treat it with care. Please pay attention
to the following points:
■
The drive rotates the compact disk at very
high speed. Do not carry it around or subject
it to shock or vibration with the power on.
■
Avoid using or storing the drive or DVDs/CDs
where they will be exposed to extreme
temperatures.
■
Avoid using or storing the drive or DVDs/CDs
where it is damp or dusty.
■
Avoid using or storing the drive near
magnets or devices that generate strong
magnetic fields.
■
Avoid storing the drive where it will
be subjected to shock or vibration.
■
Do not disassemble or dismantle
the DVD or CD-ROM drive.