Fujitsu Lifebook C2220, User Manual

Page: 42 / 122

36
L i f e B o o k C S e r i e s N o t e b o o k – S e c t i o n F o u r
need to press the Power/Suspend/Resume button to
resume operation. In the Dead Battery Suspend mode,
your data will be lost if a power source is not provided
promptly. If the Power indicator stops flashing and goes
out, you have lost the data that was not stored. Once you
provide power, you can continue to use your LifeBook
notebook while an adapter is charging the battery.
Shorted Batteries
The Status Indicator panel uses a symbol inside the
battery outline of the Battery Level indicator to display
the operating level available in that battery. (See
Figure 2-9 on page 13). If this display shows a Shorted
Battery, it means that the battery is damaged and must
be replaced so it does not damage any other parts of your
LifeBook notebook.
REPLACING THE BATTERY
With the purchase of an additional battery, you can have
a fully charged spare to swap with one that is not
charged. (Figure 4-1)
1. Have a charged battery ready to install.
2. Shut down your LifeBook notebook and disconnect
the AC adapter.
3. Press the battery release latches while lifting the
battery.
4. Remove the battery from the bay.
5. Slide the new battery into the bay. The pins will
automatically align with the connector.
6. Press the battery down until the battery release
latches snap into place.
7. Plug in the AC adapter and turn the power on.
Figure 4-1. Replacing the Battery
P O I N T
If the Lithium ion battery connector is not fully seated,
you may not be able to use your LifeBook notebook or
charge your battery.
Battery
Latches
Brie3-B5FH-8711.book Page 36 Wednesday, May 14, 2003 10:37 AM