Fujitsu ETERNUS CS800 S5 User Manual Download Page 71

Page: 71 / 634

Hardware Description and Basic Operations

Storage Modules

U41840-J-Z125-7-76

Figure 29: Power supply unit

Explanation

●

Inlet: This inlet is used to connect a power cord.

●

PSU switch: This switch is used to turn on and off the AC power supply.

Table 12: Status and meanings of each LED (power supply unit)

LED name

Description

POWER AC MISSING PSU FAIL FAN FAIL

green

off

AC power is supplied to the power
supply unit but the ETERNUS DX Disk
storage system (DC power) is not
turned on.

green

off

The power of the ETERNUS DX Disk
storage system (DC power) is turned
on and the power supply unit is
operating normally.

off

AC power is not supplied to power
supply units.

off

orange

off or on

AC power is not supplied to this power
supply unit, but AC power is supplied
to the other power supply unit.

off

orange

The power supply unit or the fan in the
power supply unit is in error status.

POWER LED

AC MISSING LED

PSU FAIL LED

FAN FAIL LED

Inlet

PSU switch

Summary of Contents for ETERNUS CS800 S5



























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ETERNUS CS800 S5

Reviews:

Related manuals for ETERNUS CS800 S5

Brands by name

Popular brands

Fujitsu ETERNUS CS800 S5, User Manual

Search results

Summary of Contents for ETERNUS CS800 S5

Reviews:

Related manuals for ETERNUS CS800 S5

Brands by name

Popular brands