Fujitsu ETERNUS CS800 S5, User Manual

Page: 290 / 634

PTT Configuration
276
U41840-J-Z125-7-76
Use the FC Initiators & Targets page to perform the following tasks:
●
View information about initiator and target Fibre Channel ports (see "Fibre Channel Initi-
ators and Targets List" on page 276 ).
●
Change the mode of a Fibre Channel port (see "Editing the Fibre Channel Port Type"
on page 276 ).
Fibre Channel Initiators and Targets List
The Fibre Channel Initiators & Targets section displays the following information for all
Fibre Channel ports:
●
Alias - The alias of the Fibre Channel port.
●
WWPN - The World Wide Port Number of the Fibre Channel Port.
●
Port Type - The current mode of the Fibre Channel port ( Initiator or Target ).
I
Click Refresh to update the list with the latest port information.
The Backpanel Locations section displays a graphical representation of the Fibre
Channel ports as they appear on the rear of the system. The diagram shows the status of
each Fibre Channel port:
Mapped Target (green), Unmapped Target (yellow), Active
Initiator (blue), or Inactive Initiator (orange).
Editing the Fibre Channel Port Type
Edit the port type to change the mode of a Fibre Channel port to initiator or target mode.
You can change the port mode only on inactive connections:
●
Before changing a Fibre Channel port type from initiator to target, unplug the Fibre
Channel port wire connection.
●
Before changing a Fibre Channel port type from target to initiator, un-map any host
mapping on the Fibre Channel port, and unplug the Fibre Channel port wire connection.
To edit the Fibre Channel Port type:
1. Select the port in the list and click Edit .
2. Select the new port mode ( Initiator or Target ) in the drop-down box (see Figure 173 ).
3. Click Update .