Fujitsu ETERNUS CS800 S5, User Manual

Page: 229 / 634

Configuration VTL
U41840-J-Z125-7-76
215
●
Starting Barcode - The first barcode number in the cartridge sequence.
You can enter any alpha-numeric string for the starting barcode. Subsequent
barcodes are incremented accordingly. For example, if you enter AA, the cartridges
are numbered AA0000, AA0001, AA0002, and so on. If you enter a starting barcode
with less than 6 characters, zeroes are appended to the barcode to make it 6
characters long.
●
Media Type - The media type of the cartridges.
I
The available media type options are determined by the type of tape drive
selected when the partition was created (see
"Adding a VTL Partition" on
page 207 ).
●
Media Capacity - The capacity of the cartridges. Select an option:
●
Native Size - The capacity is determined by the selected media type.
●
Custom Size - The capacity is a custom value. Enter the custom cartridge
capacity in the box. Make sure the value is within the acceptable range
displayed next to the box.
3. Click Apply .
Media Actions
Use the Media Actions page to perform actions on virtual tape cartridges. You can import,
export, and remove cartridges from VTL partitions. You can also configure cartridges to be
write protected to prevent access.
To access the Media Actions page, on the Media page, click the Actions tab (see
Figure 137 ).