- (05-54) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN
FUNCTION SETTING
(5) Press the “MODE” button to access the
function setting mode.
(6) Press the “
p
” or the “
q
” buttons to select
the function number.
Each time the “MODE” button is pressed, it
switches between the one's place and the ten's
place positions.
(7) Press the FAN button to proceed to setting
the number. (Press the FAN button again
to return to the function number selection.)
(8) Press the “
p
” or the “
q
” buttons to select
the setting number.
Each time the “MODE” button is pressed, it
switches between the one's place and the ten's
place positions.
(9) Press the “TIME MODE” button once to
send the function mode information.
Pi Pi
(10) Press the “START/STOP” button once to
send the function setting information.
A beeping noise will be heard if the
command is accepted.
*Wrong code: No response
Pi Pi
Note: Please push "START/STOP" button within 30
seconds after pushing "TIME MODE" button.
FUNCTION DETAILS
Refer to 6-6. FUNCTION DETAILS
Change digit
Change digit
