FujiFilm Frontier 570 Instruction Manual Download Page 61

Page: 61 / 146

Pull the film carrier lock release lever to release
the film carrier.

While holding the handles, pull the film carrier
forward to remove it.

When moving the carrier, hold the handles with both

hands in a balanced manner.

Open the carrier cover.

Press the pressure cover release lever to release
the lock, and then open the pressure cover.

Use a cotton swab moistened with alcohol
solution (50% ethanol) to remove any dirt or dust
adhering to the rollers.

Hold the foot of the cotton swab and rub it against
the magnetic head firmly.

Click the [Next Page] button.

• The second screen “1 Film Carrier Cleaning”

appears.

Handles

Auto Film Carrier

NC100AY

Film Carrier

Lock Release Lever

Z2051

Carrier Cover

EZ053

EZ054

Pressure Cover

Pressure Cover
Release Lever

Cotton Swab

Cleaning Head

Magnetic Heads (2)

Z2008

F355/375/570

distributed by www.minilablaser.com

Summary of Contents for Frontier 570



















































































































































Search results

Summary of Contents for Frontier 570

Reviews:

Related manuals for Frontier 570

Brands by name

Popular brands

FujiFilm Frontier 570, Instruction Manual

Search results

Summary of Contents for Frontier 570

Reviews:

Related manuals for Frontier 570

Brands by name

Popular brands