139
W-1542
Print service not performed. Check the network
connections.
1. Connect the LAN cable correctly.
2. Restart the system software. If problems persist,
consult your technical representative.
W-1543
Print service not performed. Check the network
connections.
1. Connect the LAN cable correctly.
2. Restart the system software. If problems persist,
consult your technical representative.
W-1544
Print service not performed. Check the network
connections.
1. Connect the LAN cable correctly.
2. Restart the system software. If problems persist,
consult your technical representative.
W-1545
Print service not performed. Check the network
connections.
1. Connect the LAN cable correctly.
2. Restart the system software. If problems persist,
consult your technical representative.
W-1546
Print service not performed. Check the network
connections.
1. Connect the LAN cable correctly.
2. Restart the system software. If problems persist,
consult your technical representative.
W-1547
Print service not performed. Check the network
connections.
1. Connect the LAN cable correctly.
2. Restart the system software. If problems persist,
consult your technical representative.
W-1548
The printer is not in STAND-BY. Press [Resume] to try
again.
Turn the printer to STANDBY.
E-1549
Cannot be serviced. Consult technical representative.
Restart the system software. If problems persist, consult
your technical representative.
I-1594
Reading service name list. Wait.
—
E-1596
Service info cannot be read. Check the network
connections.
1. Connect the LAN cable correctly.
2. Restart the system software. If problems persist,
consult your technical representative.
W-1620
Uncompleted orders remain.
They will be printed next time at the time of starting.
If the [OK] button is pressed, the post-operational
process will be started. To continue printing, press the
[Cancel] button to proceed [Main Menu] - [2 Print].
W-1621
As for the next piece of print, the width of paper is
mismatched to the magazine.(???mm)
Press [Order] to output forcibly per Order. Press [Image]
to output forcibly per Image.
When replacing the magazine, press [OK] after the
initialization of printer is completed. To stop printing,
press [Abort].
Press the [Order] button to output all current images
forcibly. Press the [Image] to output forcibly the image
currently processed only. It is recommended that you
replace the magazine for the correct one, then press the
[OK] button after initializing the printer, and then perform
printing again. If the [Abort] button is pressed, the
printing process will be stopped.
W-1622
As for the next piece of print, the paper type is
mismatched to the magazine.
Press [Order] to output forcibly per Order. Press [Image]
to output forcibly per Image.
When replacing the magazine, press [OK] after the
initialization of printer is completed. To stop printing,
press [Abort].
Press the [Order] button to output the current images
forcibly. Replace the magazine for the correct one, then
press the [OK] button after initializing the printer, and
then perform printing again. If the [Abort] button is
pressed, the printing process will be stopped.
W-1623
Print size not registered.
Register it in “Setup and Maintenance” and then continue
printing.
Register the proper print size in "Setup and
Maintenance", then continue printing.
W-1624
To print using upper magazine press [Upper]
To print using lower magazine press [Lower]
Press [Cancel] to return to previous screen.
Install the proper magazine.
No
Message
Actions
distributed by www.minilablaser.com
