121
FMPC
1
Select the print size to be modified or registered
from the list.
• ID [No.], Name, Width, Length, Border, four BD
values and [Display(ON/OFF)] are displayed.
2
Move the cursor to the print size to be used,
select “ON” or “OFF” shown in the “Display”.
If you select “ON”, the description appears in the
list. If you select “OFF”, nothing appears in the list.
Make sure that the size names in FMPC are the
same as in FRONTIER.
When registering a new size, make sure to restart
FMPC, and to check if the printing status screen is
opened.
3
Click [OK]
• Operation returns to the “4 Setup and
Maintenance” screen.
9.2.12 DIC Order Back Printing Setup
See 9.1.4 DIC Order Back Printing Setup”.
9.2.13 Paper Magazine Registration
(451)
[Selection]
“4 Setup and Maintenance” - “5 Printer Adjustment/
Maintenance” - “1 Paper Magazine Registration”
NOTE:
This menu cannot be used while the processor is
operating.
[Procedure]
Register the paper magazine to be used.
“ID”:
Enter the magazine ID.
“Width”:
Enter the paper width (mm).
“Paper”:
Select the paper surface type.
“Length”:
Enter the roll paper length (m).
“Remain”:
Enter remaining paper length (m).
“BP”:
Select “YES” or “NO” for back printing.
“Line speed”: Selected automatically according to the
“Type”.
“Type”:
Select the paper type correctly. The
paper type is indicated on the paper
package.
[Set] button:
Click this button to register the entered
items.
distributed by www.minilablaser.com
