FujiFilm Frontier 570 Instruction Manual Download Page 113

Page: 113 / 146

113

FMPC

9.2.1

Menu Screen Display

NOTE:

For details of mouse operation, see the “Basic

Operation Instructions” manual.

On the “Main Menu”screen, select “Setup and
Maintenance”, and press the [START/ENTER]
key.

In the “Log-in” dialog, select “Laboratory
Manager”, then type “0000” and click [OK].

• “Setup and Maintenance” screen appears.

To perform the setup and maintenance
operations, select the [+] button of the desired
item from the “Item List” box.

• The “Sub-item List” box of the selected item

appears.

To perform the desired operation, double-click on
the operation, or select the operation and click
[START].

• The operation screen appears.

Perform the operation by following the displayed
instructions that appear.

Upon completion of the operation, click [End],
[OK] or [Cancel].

• “4 Setup and Maintenance” screen appears.

Click [END] on the menu bar.

• Operation returns to the “Main Menu” screen.

9.2

Laboratory Manager Menu

distributed by www.minilablaser.com

Summary of Contents for Frontier 570



















































































































































Search results

Summary of Contents for Frontier 570

Reviews:

Related manuals for Frontier 570

Brands by name

Popular brands

FujiFilm Frontier 570, Instruction Manual

Search results

Summary of Contents for Frontier 570

Reviews:

Related manuals for Frontier 570

Brands by name

Popular brands