FujiFilm Frontier 570 Instruction Manual Download Page 47

Page: 47 / 146

Select the images to be printed. To register all
images, click the [Select All] button.

Select the print size.

IMPORTANT

In this step, you must select the print size for

each order.

Specify if or not the index/large index is to be
outputted, and its output size, and then if the
DSC date is to be printed on the print or not.

If you want to create an index print only, specify

number of index or large index prints, while entering

“0” in [Print Q’ty] box.

Select the resizing specification. (See “2.2(2)
Resize” in “Instruction Manual (Service
Specification)”.)

Select the images.

Select the print size.

Specify if or not the index/large index is to be
outputted, size, and if DSC date is to be printed or
not.

Select the resizing option.

distributed by www.minilablaser.com

Summary of Contents for Frontier 570



















































































































































Search results

Summary of Contents for Frontier 570

Reviews:

Related manuals for Frontier 570

Brands by name

Popular brands

FujiFilm Frontier 570, Instruction Manual

Search results

Summary of Contents for Frontier 570

Reviews:

Related manuals for Frontier 570

Brands by name

Popular brands