15
2.2.2
Printing Status Screen
IMPORTANT
When performing the film printing from the scanner(SP), make sure that the Printing Status screen is opened after
the pre-operational check is completed. If the printing is started before the Printing Status screen does not appear,
the operation may be stopped. If this occurs, open the Printing Status screen, and then resume printing.
IMPORTANT
If a jamming occurs in the printer(LP) during the printing process, the any of the orders that are not printed yet in the
“Done” list may not be printed. Please perform printing process for these orders again.
1. “Next Print” List
IMPORTANT
The order in the “Next Print” list remain even
after the FMPC is shut down the restarted, while
the orders already transferred to the “Done” list
will be deleted after the restart of FMPC.
(1) Lists up the orders done in the Imaging
Controller or FRONTIER. When printing is
completed, they are moved to the Complete
List.
(2) Up to 15 order lines are visible within the list
box, and up to 999 lines can be accepted.
(3) To select the order, click the line. To cancel
selecting the line, click the line itself again.
Selecting of order(s) is available only when
transferring of orders is stopped (when
[Resume] button is displayed).
(4) This list box displays the following order
information.
[A] Status: Displays the status as “Printing...”.
[B] Order No.: Shows order No.(Al
5-digit numerals) for Imaging Controller or
sorting No. for FRONTIER.
[C] Service Name: “Print Service”, etc. for DI
printing or “Film Input” for FRONTIER film
printing.
9
1
2
3
15
12
13
14
8
11
4
5
10
6
7
distributed by www.minilablaser.com
