H1-1
006-252-05
06.30.01 FM3040
FM-DP L
Service Manual
H1-1
MAINTENANCE 1. OUTLINE OF EQUIPMENT
1.
OUTLINE OF EQUIPMENT
1.1
Outline of Equipment
Features of This Equipment
• Dry printer adopting laser exposure and thermal development method with a
high speed processing ability of about 130 sheets/hour (35 x 43 cm).
• Improved operationability with large liquid crystal touch screen.
• Film sizes 35 x 43 cm, 26 x 36 cm and 20 x 25 cm (*1) can be used. Mount-
ing the optional lower removal unit allows both film sizes to be used at the
same time.
Replacing with the 20 x 25 cm film tray allows use of 20 x 25 cm films. (The
20 x 25 cm film tray can only be mounted to the lower removal unit.)
• Mounting any three interface boards from DICOM, E-IF, analog video, digital
video, digital, and optical transmission enables up to three channels to be
connected. However, for DICOM connection, the CPU90G board after
version B will be required.
• Connecting the FN-PS551 or mounting LAN90A board enables use as a
DICOM network printer.
• By setting the blue base/clear base film setting for each film tray, both types
of film can be used. (*1)
• Mounting the automatic density correction function enables the maximum
density to be set to 3.0 or 2.64 for every channel.
• Mounting the image memory board (MMB90A) enables 20 Pix/mm image
outputs of 26 x 36 cm size (*2) and 20 x 25 cm size (*1) CR input images.
• Commercial power supply can be used, without the need for extra power
supply construction.
*1: Main unit software version B03 or later.
*2: Main unit software version B01 or later.
Features of Sorter
• 10-bin sorter, of which each bin can store up to 50 films.
• Sorts by input channel.
• As this sorter has no film removal detection function in each bin, bins cannot
be changed even when the maximum storage number has been exceeded.
• Films are discharged to the top of the FM-DP L if they do not correspond to
the sorting conditions and sorting information set.
• Comes with self-diagnosis function which works immediately after power
ON.