fSONA Sonabeam E Series, Installation Manual

Page: 23 / 87

Preparing Your Installation Site
wireless at the speed of light
…………….
13
S
O
N
A
b
e
a
m
E
-S
e
ri
e
s
In
st
a
lla
ti
o
n
M
a
n
u
a
l
WARNING!
When constructing your mast in exposed areas outdoors, ensure it has a solid
ground connection. A 6AWG insulated, stranded ground wire, no longer than 25’ in
length is recommended.
NOTE…
Contact your local fSONA representative for assistance in deploying suitable
mounting masts. Refer to specific application notes for tower installations and more
information on rooftop installations. These application notes are available from
your fSONA representative:
APPNOTE-95-0009 Mounting SONAbeams on Buildings
APPNOTE-95-0185 Mounting SONAbeams on Towers
APPNOTE-95-0227 Mounting Stablity for SONAbeams Pt.1
APPNOTE-95-0252 Mounting Stablity for SONAbeams Pt. 2
Fabrication drawings for all of the illustrated mounting options are available by
special request. Contact fSONA networks for more information…
STANDARD OPTIONS FROM fSONA
Pole/Wall Mount
The optional Pole Mount is designed for
mounting a SONAbeam terminal to any
stable, vertical, steel mast with a 2 ½” to 4
½” O.D. (4” O.D. is recommended...) and a
minimum wall thickness of ¼“. The mast
may be rooftop mounted or wall mounted, as
in the examples shown in
Figure 3
. This
mounting option comes complete with a pair
of U-bolts and associated hardware bits.
This accessory can alternatively be affixed directly to a wall.