Fronius LaserHybrid Ultracompact Twin, Operating Instructions Manual

Page: 62 / 120

62
Swing in the feed rollers
Push the pressure lever downwards
Fitting the weld-
ing torch wearing
parts IMPORTANT! The wire electrode must be threaded in when fitting the welding torch wear-
ing parts.
1
Fit the gas distributor
2
Screw in the contact tip adapter
(8 mm box spanner)
Tightening torque = 5 Nm
* IMPORTANT! When fitting the gas distributor, ensure that the recess on the gas
distributor is positioned above the raised element on the welding torch.
11
10
19
20
1 2