Fronius LaserHybrid Ultracompact Twin, Operating Instructions Manual

Page: 17 / 120

17
EN
Replacement and
wearing parts
Calibration of
power sources
CE marking
Copyright
Use only original spare and wearing parts (also applies to standard parts).
It is impossible to guarantee that parts sourced from third parties are designed
and manufactured to meet the demands made of them, or that they satisfy
safety requirements.
When ordering, please give the exact designation and part number as shown
in the spare parts list, as well as the serial number of your device.
In view of international standards, regular calibration of power sources is nec-
essary. Fronius recommends a 12-month calibration interval. For more infor-
mation, please contact your service centre.
The LaserHybrid head fulfils the fundamental requirements of the Low Voltage
Directive and the Electromagnetic Compatibility Directive and is thus CE-
marked.
Copyright of these operating instructions remains with the manufacturer.
The text and illustrations are all technically correct at the time of printing. We
reserve the right to make changes. The contents of the operating instructions
shall not provide the basis for any claims whatsoever on the part of the pur-
chaser. If you have any suggestions for improvement, or can point out any
mistakes that you have found in the instructions, we will be most grateful for
your comments.