Fronius LaserHybrid Ultracompact Twin, Operating Instructions Manual

Page: 89 / 120

89
EN
Replace the weld-
ing torch
Remove the two Allen screws
(5 mm)
Disconnect the two media couplings
L = Lead electrode
T = Trail electrode
Cut off the wire electrodes in front of
the gas nozzle
Remove the three Allen screws from
the underside of the welding torch
(3 mm)
Tightening torque when fitting:
2 Nm
Pull the welding torch with welding
torch inner liners downwards
Installation in the reverse sequence
IMPORTANT! When fitting the welding
torch:
-
The wire electrodes for guiding the
welding torch inner liners must be
threaded in
- Ensure that the O-rings are present on
the current interface and in a suitable
condition
L
T
2
1
1
2
4
3
3
3
CAUTION! Risk of damage due to
falling parts!
Ensure that the welding torch
does not fall when undoing the
screws.
3
4
4
5