FROMM
FROMM
FROMM
FROMM
FS4.1893-Manual-30.18XX.02-EN-Version02_R1
It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2013
www.fromm-stretch.com
36
INDICATIONS
START-UP CYCLE ACTIVE
An acoustic signal device has been installed in the control cabinet,
which will be activated first during some seconds as a warning every
time before the
AUTOMATIC PROGRAM
is executed.
The operator will thus be able to leave the danger zone before the
machine starts to operate.
The machine will only start to operate after this period has been
elapsed.
RESET MACHINE
The automatic program of the wrapping machine is interrupted and a
failure indication will be displayed on the console, when the
emergency stop is activated or any other failure is detected.
Wrapping can only be started again after pushing reset on the
control panel. Thus, the failure is reset and the control voltage is
activated again, assuming that the mains switch still has been
switched on. The cause of the failure has to be solved first, of
cause.
By holding down the reset button for 3 seconds the wrapping
machine can be brought back to the start conditions.
The turntable returns back to the zero position of the machine.
The film carriage returns back to the zero position of the mast
The film carriage has to be brought back to zero position, by pushing
the manual downwards button.
