FROMM
FROMM
FROMM
FROMM
FS4.1893-Manual-30.18XX.02-EN-Version02_R1
It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2013
www.fromm-stretch.com
60
ALARMS
E7 : NO PALLET DETECTED
Problem suggestion
Possible solution
-
The photocell on the film carriage doesn’t
detect any pallet on the turntable.
-
Clean the photocell
-
Line up the photocell, thru the center of the table
-
Pallet contains dark goods, replace the sensor
for a sensor N5.2638 or N5.2651
-
Pallet contains odd goods or strange formed
goods. Cover the photocell with a piece of carton
and check if the machine will start
-
The photocell is faulty
Should the problem persist, contact the Customer After-Sales Service of MANUFACTURER
E5 : SWITCH FILM ROLLES
Problem suggestion
Possible solution
-
This alarm signals that exerted
pressure on the film carriage flap has
been detected by the micro switch that
interlocks the crush-proof roll guard.
-
Open the door and check for eventual film
residuals.
-
Check if the sensor (2) (
Fig.2
) is still positioned
in the correct way.
- Check if the sensor “with opened door”
is pressed.
-
Release the sensor (3) (
Fig. 3
)
- Limit switch faulty
-
Check the wiring
-
Check the signal on the board.
-
Replace the limit switch (2) (Fig. 2)
- Press RESET
-
Machine will receive the commando reset
Fig. 1
Fig. 2
Fig. 3
Should the problem persist, contact the Customer After-Sales Service of MANUFACTURER
1
2
3
3
