FS4.1893-Manual-30.18XX.02-EN-Version02_R1
FROMM
It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2013
www.fromm-stretch.com
37
BASIC OPERATING INSTRUCTIONS
Button
Explanation
Displayed message
(where applicable)
Automatic or manual mode selection.
By pressing the key, the machine will set in automatic
or manual mode, the red led will indicate the selected
mode
PROG.YY XXXXXXXX
USED FILM 0000m
Or
MANUAL MODE
Or main
Screen
Program selection: (YY: from 1 up to 30)
(this button will not function while the machine is
operating)
By pushing this button it will be possible to select a set
program. On the display the actual program flashes. By
p or- the program displayed increases or
decreases. After a few seconds, or by pressing another
key, the program will be set. Each program can be
personalised.
PROG.YY XXXXXXXX
USED FILM 0000m
YY = actual program
XXXXXXX= displays
type of cycle
U-D =Up down
U =Up only
U-D-S=Up down top
sheet
U-S =Up top sheet
Direct selection Program 1
Direct selection Program 2
Direct selection Program 3
Direct selection Program 4
Direct selection Program 5
Direct selection Program 6
Direct selection Program 7
Push for increasing the displayed parameters
