FS4.1893-Manual-30.18XX.02-EN-Version02_R1
FROMM
It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2013
www.fromm-stretch.com
49
WRAPPING PROGRAMS
Led ON
=
Toppress has been selected and will function in the requested
program.
This function can be selected per program.
Led OFF
= Toppress has not been selected and will not function in the
requested program.
1.
Single wrapping.
After the pre-set number of bottom wraps has
been completed, while the turntable is turning, the film carriage will
go upwards. When the film carriage has arrived on top and the pre-
set number of top wraps has been completed, the turntable will halt
in phase. The film can be cut now on top. Now the film can be cut
and the pallet can be transported the selected number of top wrap.
2.
Double wrapping.
The complete (double) wrapping program will be
executed with this function. After completing the pre-set number of
bottom wraps the film carriage will go upwards, then it halts to lay the
top selected top wraps, while the turntable keeps turning, and then it
will go downwards again. After which the turntable will halt in phase.
Now the film can be cut and the pallet can be transported.
3.
Single wrapping + TS.
After the pre-set number of bottom wraps
has been completed, while the turntable is turning, the film carriage
will go upwards. When the film carriage has arrived on top it first,
lays the selected number of top wrap, move downwards and wait
until the topsheet has been laid, after puching start the film carriage
will go upwards again and wrapping in the topsheet the selected
number of top wrap, then the turntable will halt in phase. The film
can be cut now on top. the selected number of top wrap
4.
Double wr TS.
After the pre-set number of bottom wraps
has been completed, while the turntable is turning, the film carriage
will go upwards. When the film carriage has arrived on top it first,
lays the selected number of top wrap, move downwards for the
selected descent Spacer and wait until the top sheet has been laid,
after pushing start the film carriage will go upwards again another
number of pre-set top wraps is laid, after this the film carriage will
go downwards again while the turntable keeps turning. After which
the turntable will halt in phase. The film can be cut and the pallet can
be transported
5. Single wrapping at pre set height.
After the pre-set number of
bottom wraps has been completed, while the turntable is turning, the
film carriage will go upwards till the preset height. Then it halts to lay
the top selected top wraps, while the turntable keeps turning, When
the film carriage has arrived on top and the pre-set number of top
wraps has been completed, the turntable will halt in phase. The film
can be cut now on top. Now the film can be cut and the pallet can be
transported the selected number of top wrap
6.
Double wrapping at pre set height. .
After the pre-set number of
bottom wraps has been completed, while the turntable is turning, the
film carriage will go upwards till the preset height. Then it halts to lay
the top selected top wraps, while the turntable keeps turning, after
which the turntable will halt in phase. Now the film can be cut and the
pallet can be transported.
