FS4.1893-Manual-30.18XX.02-EN-Version02_R1
FROMM
It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2013
www.fromm-stretch.com
31
ASSEMBLY SEQUENCE
9. Check the functionality of the FILM CUTTING SYSTEM. (
Fig. 1 & 2
)
-
If you make a bridge between terminals 20 & 21 the knife will be placed in forward position.
Make this bridge manually and keep the contact not longer to 0,5 Seconds. Otherwise the
transformer will burn. (24Volts) (Advised only for FROMM engineers)
Fig. 1
Fig. 2
10.
Check the functionality of the TOP PRESS (
Fig. 1 / 2 / 3 & 4
)
-
Change to manual mode (
Fig. 2
)
-
Movement UP (
Fig. 3
)
-
Movement DOWN (
Fig. 4
)
Movements can only be made when the pressure plate (1 / 2 & 3) has been mechanically installed.
(
Fig. 1
)
Fig. 1 / Manual movement
Fig. 2
Fig. 3
Fig. 4
11.
Check the functionality of PROXIMITY SWITCHES for the LOW and TOP position of the
TOPPRESS (
Fig. 1 & 2
)
Fig. 1
Fig. 2
2
1
3
20
21
