Provided By
http://www.MyBinding.com
http://www.MyBindingBlog.com
Martin Yale
Checksigner 912
Feed Assembly
Removal
Page 1: ...Provided By http www MyBinding com http www MyBindingBlog com Martin Yale Checksigner 912 Feed Assembly Removal ...
Page 2: ...following tools will be needed 1 Martin Yale Industries Inc security socket MRS012014 2 Set of standard Allen wrenches 3 Medium size Phillips head screw driver 4 Security driver NOTE Other tools may be necessary to work on the assembly INITIAL DISASSEMBLY 1 Begin by removing the outer cover of the unit This includes the left and right side cover and the hood bezel assembly see photo on next page N...
Page 3: ...ves The connection should be removed at the housing This can be accomplished by wiggling the connector end back and forth without pulling on the wires A weak wire could cause sporadic operation of the unit Remove both side covers and bezel assembly before removing feed drive Bezel assembly is the hood back and bottom of the machine in one Loosen set screw to move components and access sensor Compo...
Page 4: ...e and may be difficult to find inside their mounting hole 5 With Allen bolts removed the feed assembly can now be removed from the unit see photo This is best accomplished by rocking the assembly back and forth until it dislodges The retarder for the machine should be fully raised and feed table removed before this is done NOTE Depending on the age of the machine there may be a detachable safety p...
