Fresenius Kabi Volumat Agilia, Technical Manual

Page: 66 / 138

66 va05.1_001e_Eng.fm
T
rou
ble
sh
ootin
g
Flow rate
flashing alarm
 Flow rate has
been modified but
has not been
confirmed
 Check the flow rate and
confirm with the OK key
End of infusion
pre-alarm
 The remaining
VTBI is less than

5% of the initially
programmed VTBI
or 5 minutes or

5 ml remain before
the initially
programmed VTBI
is reached
 Check if the volume remaining
in the container corresponds to
the remaining VTBI. If necessary,
prepare a container for a new
infusion sequence. If a drop
detector is present, the end of
infusion pre-alarm is disactivated
and can be defined as an option.
End of infusion
alarm
 VTBI delivered.
KVO activated
conforming with
the configuration
 Press Stop to define the new
infusion parameters (if
necessary).
Drop detector
alarm (if used
with this
accessory)
 The drop
detector is not
correctly
positioned
 Check the drop detector
position
 Check the integrity of the drop
detector
 Check the drop detector
connection
 Try the device using another
drop detector
 If the trouble keeps up, check
the connection on the device
 Replace the component if
necessary
 The drop
detector has been
connected then
disconnected
 The drop
detector is
disconnected
when the pump is
configured to
function with it
 Connect the drop detector to
the pump and to the drip
chamber
Under flow rate
alarm
 Flow rate
detected by the
drop detector is
lower than the set
flow rate
 Check the container
 Check the roller clamp

Check that liquid forms
properly approx. 20 drops / ml
Displayed
message
Meaning Cause Action