Fresenius Kabi Volumat Agilia, Technical Manual

Page: 58 / 138

58 va04.4_001e_Eng.fm
Pr
even
tive ma
inten
ance
4.6.2 Measuring with a scale
Use a new administration set [otherwise, make a hole in the filter of the administration set
(if equipped with) and use this set for maximum 10 calibrations].

Do not recycle medical water.

Keep the container clean changing it as often as necessary.

Make sure the environmental temperature is between 18°C and 30°C.
Equipment needed
 Chronometer
 Scale:
Flow rate value Scale sensitivity
x < 5ml/h 1/10000th
5ml/h < x < 30ml/h 1/1000th
x > 30ml/h 1/100th
 Test tube or beaker with 1ml graduations.
 Liquid: distilled water, oil
 Catheter extension with Luer Lock end (length 100cm, internal diameter 2.5mm)
 Needle:
Flow rate value Type of needle
x < 30ml/h G26
x > 30ml/h G18 or G21
Installation
 Following the diagram below:
Anti-vibration measuring table
1 cm
Catheter extension bracket support
50 cm



Observe the equipment horizontal installation plan.

 Fill the container with 600ml or more of distilled water.
 Connect an administration set with the container.
 Connect the canula with the distal end of the administration
set.
 Fit the administration set on to the pump.
 Fill the administration set with water. Take care that no air is
in the administration set before the measurement is started.