Freecom ValueLoader, User Manual

Page: 76 / 88

Diagnostics and Troubleshooting
ValueLoader Error Codes
62 ValueLoader LTO Tape Autoloader User Manual
3 0 A4 Import/Export Slot Position
Error.
The Import/Export slot door was not in the
requested position during device operation.
This can be caused by manually opening the
door or by a cartridge blocking the door. Try
removing the cartridge or obstruction, then
power cycle or reset the ValueLoader.
3 0 A5 Fan Error. The ValueLoader processor has detected a fan
error.
3 0 B0
ROM Error. Cycle power on the ValueLoader and attempt
the operation again. If the error recurs, contact
Technical Support.
3 0 B1
RAM Error. Cycle power on the ValueLoader and attempt
the operation again. If the error recurs, contact
Technical Support.
3 0 B2
NVRAM Error. Cycle power on the ValueLoader and attempt
the operation again. If the error recurs, contact
Technical Support.
3 0 B3
Controller Timer Failure. An unrecoverable failure has occurred in the
controller timer circuit.
3 0 B4 Loader to Drive
Communication IC Error.
A failure in IC handling loader to drive
communication has occurred.
3 0 B5 Display Error. Cycle power on the ValueLoader and attempt
the operation again. If the error recurs, contact
Technical Support.
3 0 B6 Memory Error. Cycle power on the ValueLoader and attempt
the operation again. If the error recurs, contact
Technical Support.
3 0 B7 Timeout on ValueLoader
Command.
Cycle power on the ValueLoader and attempt
the operation again. If the error recurs, contact
Technical Support.
Error Code Description Details