Freecom ValueLoader, User Manual

Page: 21 / 88

Installing the ValueLoader
Unpacking the ValueLoader
ValueLoader LTO Tape Autoloader User Manual 7
Unpacking the ValueLoader
1
Before you begin, clear a desk or table so you can unpack the
ValueLoader. You also need to select an open 2U computer rack
location or a desktop location near the server that is to be the host
for the ValueLoader.
Unpack and inspect the ValueLoader for shipping damage by
doing the following:
1
Clear a table or desk so that you have room to unpack the
ValueLoader.
2
Inspect the shipping box for damage. If you notice any
damage, report it to the shipping company immediately.
3
Open the shipping box and remove the accessories package.
Set the accessories package aside.
Humidity 20-80% RH, non-condensing
Clearance Back: Minimum of 15.4 cm (6 inches)
Front: Minimum of 30.8 cm (12 inches)
Sides: Minimum of 5.08 cm (2 inches)
Caution:
If the room temperature you are working in differs
from the shipping or storage temperature by 15° C
(30° F) or more, allow the ValueLoader to acclimate
to the surrounding environment for at least 12 hours
before opening the shipping carton.
Requirement Description