Freecom ValueLoader, User Manual

Page: 70 / 88

Diagnostics and Troubleshooting
Removing Stuck Cartridges
56 ValueLoader LTO Tape Autoloader User Manual
2
Remove the power and SCSI cables from their connectors on
the back panel of the ValueLoader.
3
Remove the ValueLoader from its rack slot, if applicable, and
place it on a table or other flat work surface.
4
If the ValueLoader is a rackmounted, remove the front cover
screws that secure the mounting brackets from both sides of
the ValueLoader, as shown in figure 15 .
Figure 15 Removing
Mounting Brackets
(Left Side Shown)
5
Remove the seven screws that secure the ValueLoader cover:
five on the back panel and one on each side of the
ValueLoader.
6
Remove the top cover by lifting it from the back and easing it
out from under the front panel display cover.
Warning:
To prevent injury, disconnect all cables from the
ValueLoader before removing the ValueLoader
cover. Keep fingers away from the ValueLoader
fan.