Franklin Electric Cerus X-Drive, Installation And Operation Manual

Page: 95 / 156

ACCESSORIES
Optional Extension Cards
95
ACCESSORIES
Optional Extension Cards
A selection of accessory extension cards is available to add additional functionality to the X-Drive, including:
10000004840 X-Drive FE Connect Communication Card: This card adds Bluetooth communication to the
drive, providing the ability to program, control, and monitor the VFD using the X-Drive FE Connect mobile
application. When the card is installed, and the drive is powered on, parameter
Com Card ID [Comm-30]
should
identify 6_FELE BT Card . Refer to “FE Connect for Cerus X-Drive Mobile Application” on page 85 to connect the
mobile app to the drive.
CMC-EIP01 Ethernet Communication Card: This card supports Ethernet IP and Modbus TCP protocols. To
install the card into the VFD, refer to “Extension Card Installation” on page 97 and “Setup Optional Ethernet
Communication Card” on page 101 . Refer to “Modbus Communication” on page 87 for additional parame -
ters and configuration information.
Once configured, the LED Indicators on the drive give the status of the network, parameters, and VFD
power:
LED Light Status Indication Required Action
NS Green & red alternate Network self-test mode None
Solid green CIP connection established None
Blinking green No CIP connection at power-on None
Solid red IP duplicate / conflict Check IP Settings
Blinking red COMMS loss / Time-out Check COMMS setting
OFF No connection to network Check network connection
MS Green & red alternate Drive in self-test mode None
Solid green Parameters are set None
Blinking green Parameters are not yet set Finish setting parameters
Solid red VFD hardware failure Check with FE support
Blinking red VFD/COMMS card error Check parameters setting
OFF No power Check if VFD is powered
Power ON Power is normal None
OFF No power Check if VFD is powerd
Link ON Transmit/receive is normal None
OFF No connection to network Check network connection
Contact with hazardous voltage could result in death or serious injury.
• Disconnect and lock out all power before installing or servicing equipment.
• Use extreme caution and take necessary safety measures if opening the cover at any time while
drive is powered.